Destination Port Range

Only packets with this assigned destination port range

 

will statically bind to the assigned WAN port.

Protocol

Only packets with this assigned protocol will statically

 

bind to the assigned WAN port.

WAN Port

The WAN port that the packets matching this rule are

 

statically bound to.

Add a Rule

Fill in the "Source IP Range", "Destination IP Range”,

 

“Source Port Range”, "Destination Port Range",

 

"Protocol" or "WAN Port" of the setting to be added and

 

then click "Add". Then this rule of Protocol and Port

 

Binding will be added into the "Protocol and Port Binding

 

Table" below. If you find any typo before adding it and

 

want to retype again, just click "Reset" and the fields will

 

be cleared.

Remove a Rule

If you want to remove some rule of Protocol and Port

 

Binding from the "Protocol and Port Binding Table",

 

select the rules you want to remove in the table and then

 

click "Delete Selected". If you want remove all rules from

 

the table, just click "Delete All" button. Click "Reset" will

 

clear your current selections.

Click <Save> at the bottom of the screen to save the above configurations and press “Apply and Reboot” to apply the configuration and reboot the XRT-D router. You can now configure other advance sections or start using the router (with the advance settings in place).

3.4.6 ALG Settings

You can select applications that need “Application Layer Gateway” to support.

43