Enabled

Select “Enabled” to enable the remote management function.

Click <Save> at the bottom of the screen to save the above configurations and press “Apply and Reboot” to apply the configuration and reboot the XRT-D router. You can now configure other advance sections or start using the router (with the advance settings in place).

3.2 WAN

Use the WAN Settings screen if you have already configured the Quick Setup Wizard section and you would like to change your Internet connection type. The WAN Settings screen allows you to specify the type of WAN port connect you want to establish with your ISP. In the XRT-D’s WAN, the WAN settings offer the following selections for the router’s WAN port, Dynamic IP, Static IP, PPPoE, PPTP, L2TP, Telstra Big Pond, Policy, QoS, DNS and DDNS. You have to select one of the two/four WAN ports first and configure one WAN port at a time.

Parameters

Description

3.2.1 Dynamic IP

Your ISP will automatically give you an IP address

3.2.2

Static IP address

Your ISP has given you an IP address already

3.2.3 PPPoE

Your ISP requires PPPoE connection.

3.2.4 PPTP

Your ISP requires you to use a Point-to-Point Tunneling

 

 

Protocol (PPTP) connection.

3.2.5

L2TP

Your ISP requires L2TP connection.

3.2.6

Telstra Big Pond

Your ISP requires Telstra Big Pond connection.

3.2.7

Policy

You can configure WAN policy.

26