Planet Technology XRT-104D, XRT-402D 3.5.2 URL Blocking

	Note: You need to give your LAN PC clients a
	fixed/static IP address for the Access Control rule to
	work properly.
Client PC Service	You can block the clients from accessing some Internet
	services by checking the services you want to block.
Protocol	This allows you to select UDP, TCP or both protocol
	types you want to block.
Port Range	You can assign up to five port ranges. The router will
	block clients from accessing Internet services that use
	these ports.
Apply Changes	Click “Apply Changes” to save the setting.
Reset	Click “Reset” to clear all fields.

Click <Save> at the bottom of the screen to save the above configurations and press “Apply and Reboot” to apply the configuration and reboot the XRT-D router. You can now configure other advance sections or start using the router (with the advance settings in place).

3.5.2 URL Blocking

You can block access to some Web sites from particular PCs by entering a full URL address or just keyword of the Web site.

Parameters	Description
Enable URL Blocking	Enable/disable URL Blocking.
Add URL / Keyword	Fill in “URL/Keyword” and then click “Add”. You can
	enter the full URL address or the keyword of the web site
	you want to block. If you find any typo before adding it
	47