Click on one of the firewall selections and proceed to the manual’s relevant
3.5.1 Access Control
If you want to restrict users from accessing certain Internet applications/services (e.g. Internet websites, email, FTP etc.), then this is the place to set that configuration. Access Control allows users to define the traffic type permitted in your LAN. You can control which PC client can have access to these services.
Parameters | Description |
Filter client PCs by IP | Fill “IP Filtering Table” to filter PC clients by IP. |
Add PC | You can click Add PC to add an access control rule for |
| users by IP addresses. |
Remove PC | If you want to remove some PC from the "IP Filtering |
| Table", select the PC you want to remove in the table |
| and then click "Delete Selected". If you want remove all |
| PCs from the table, just click "Delete All" button. |
Filter client PC by MAC address | Check “Enable MAC Filtering” to enable MAC Filtering. |
Add PC | Fill in “Client PC MAC Address” and “Comment” of the |
| PC that is allowed to access the Internet, and then click |
| “Add”. If you find any typo before adding it and want to |
| retype again, just click "Reset" and the fields will be |
| cleared. |
Remove PC | If you want to remove some PC from the "MAC Filtering |
| Table", select the PC you want to remove in the table |
|
|
| 45 |