and then click "Delete Selected". If you want remove all PCs from the table, just click "Delete All" button. If you want to clear the selection and re-select again, just click “Reset”.

After press “Apply and Reboot” to apply the configuration and reboot the XRT-D router, you can now configure other advance sections or start using the router (with the advance settings in place).

Add PC

Parameters

Description

Client PC Description

The description for this client PC rule.

Client PC IP Addresses

Enter the IP address range that you wish to apply this

 

Access Control rule. This is the user’s IP address(es)

 

that you wish to setup an Access Control rule. You can

 

select a range of users simply by inputting the starting

 

users’ IP address and the last user’s IP address in the

 

appropriate boxes. If you want to select only one user

 

then input the user’s IP address in both boxes.

 

 

 

46