IMPORTANT SAFETY INFORMATION
Precautions
Please read this manual carefully before using your KAGA COMPONENTS Data Projector and keep the manual handy for future reference.
This user's manual covers models
The projection distance is the same in these models, but the inclusion of functions that can use Image Viewer and Wireless Network depends on the model.
See the table below for details.
This manual describes the full complement of functions of the
Model Name | Wireless Network | Image Viewer | Display Resolution |
1024×768 (XGA) | |||
— | — | 1024×768 (XGA) | |
— | — | 800×600 |
: Function included
Note that when a function is applicable to a certain model, Applicable Model:
CAUTION
TO PREVENT SHOCK, DO NOT OPEN THE CABINET. NO
This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any part inside of this unit.
This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. Therefore, it should be read carefully in order to avoid any problems.
The above cautions are given on the bottom of the product.
WARNING
TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO NOT USE THIS UNIT’S GROUNDED PLUG WITH AN EXTENSION CORD OR IN AN OUTLET UNLESS ALL THREE PRONGS CAN BE FULLY INSERTED. DO NOT OPEN THE CABINET. THERE ARE
Applicable Model:
RF Interference
WARNING
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer- ence in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio commu- nications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turn- ing the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorientate or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
DOC Compliance Notice
This Class B digital apparatus meets all requirements of the Canadian
Hg: Lamp in This Product Contains Mercury. Dispose of Lamp According to Local, State or Federal Law.