View
Vertical Flip / Horizontal Flip
In selecting the method of projecting to the screen, these functions are set when the projector is in a rear screen installation.
Select the item name “Vertical Flip” or “Horizontal Flip” and select the setting |
|
|
| ||||||||
contents with the SELECT ( | ) buttons. |
|
|
|
|
|
| ||||
“Vertical Flip” Off | “Vertical Flip” Off | “Vertical Flip” On | “Vertical Flip” On | ||||||||
“Horizontal Flip” Off | “Horizontal Flip” On | “Horizontal Flip” On | “Horizontal Flip” Off | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Keystone
Keystone distortion will occur when the projector and screen are on an angle (in the vertical orientation).The Keystone function is used to manu- ally adjust this distortion.
Select the item name “Keystone” and correct the keystone distortion using the
SELECT ( ) buttons.
Press the button. | Press the button. |
Note:
*The menus and other
*Please note that depending on the projected picture and the projection conditions, it may not be possible to eliminate keystone distortion completely.
*When the Auto Keystone function is OFF, the keystone adjustment settings will be maintained even when the power has been turned off.
*See “Adjustment of the Projection Screen” on Page
See “Keystone Manual Adjustment” on Page
Auto Keystone
Auto Keystone is set to provide an automatic adjustment of the key- stone distortion.
Select the item name “Auto Keystone” and set with the SELECT ( | ) buttons. | |
On | provides automatic adjustment. |
|
Off | does not provide automatic adjustment. |
|
Note:
See “Adjustment of the Projection Screen” on Page
See “Manual Adjustment of Keystone” and the aforementioned “Keystone” on Page
