PLUS Vision KG-PS120X, KG-PS125X Operating, Projector is now capable of regular projection

Power Cable Connections and Switching the Power On/Off

There is an order in which the power cable is connected and the power is switched on/off.

Operating

1 Connect the AC IN connector of the projector and the power outlet using the supplied power cable.

The STANDBY indicator will light in green, and the unit will enter the standby mode.

To wall outlet

Attaching the Ferrite Core

Ferrite core

Cable

Firmly plug in all the way.

		PO
		WER
QUICK	MENU		STANDBY
		M	STATUS
			ENU
			KE
			YST
			ONE
			K
			EYS
			TONE

POWER

STANDBY STATUS

Lit green

Note:

•When the power plug will be unplugged from the power outlet, please place the projector near the power outlet so that it may be reached easily.

•The included power cable is exclusively for use with this product. Never use it with other products.

•Press the POWER/STANDBY button after the STANDBY indicator is lit in green.

2 ￿ Turn the lens cover clockwise.

1

3 Switch on the projector power

￿When the lens cover stops with a click, the projector is ready for projection.

2

Press the POWER/STANDBY button.

POWER

(button on main unit)

The first time the power is switched on after purchase, [Menu Language Select] will be displayed. See Page E-22 for informa- tion about language selection.

•When the power is turned on, the POWER indicator starts flashing green, then stops flashing after about 60 seconds. If the STATUS indicator lights green at this time, the lamp mode is set to “Eco”. See E-28 and 49 for instructions on selecting.

POWER/
STANDBY	MENU
COMPUTER	ENTER
VIDEO CANCEL	QUICK
POWER	POWER
STANDBY STATUS	STANDBY STATUS

Goes off

Note:

While the POWER indicator is blinking, the power cannot be switched off. Check that the POWER indicator is lit steadily, then switch off the power.

•If the power does not come on, see “When the STATUS Indicator is Lit or Flashing” on Page E-55.

If the “Password” input window is displayed: See E-32. A password is set for this projector.

The projector cannot be used unless the correct password is input. To turn off the power: See E-23.

Blinking	This	Lit green	This
green	indicator is	Power is	indicator is
(Approxi-	also lit	on	also lit
mately 60	green in		green in
seconds)	Eco-mode.		Eco-mode.

The projector is now capable of regular projection.

Note:

The image can be muted quickly by closing the lens cover while the image is being projected.

4 Switch on the power of the connected equipment

E-21