View

Perform this operation while projecting the picture for which the adjustment/setting will be made.

Select the menu name “View”.

See “Menu Operation Method” on Page E-37 for information about performing menu operations. The item name display will differ depending on the input signal. See “List of Item Names Offering Input Selection and Adjustments/Settings” on Page E-42.

Aspect

This function sets the horizontal and vertical picture proportions of the input signal.

Select the item name “Aspect” and select the setting contents with the SE-

LECT (￿￿) buttons.

Personal Computer Signal

Auto

Automatically enlarges or reduces the image to project

 

a full screen in a ratio of 4:3

Direct

Maintains the aspect ratio and projects a picture of the

 

maximum displayable size

Real

Projects the input signal without pixel conversion

Video Signals

Auto

While maintaining the aspect ratio, projects a full screen

 

so that no portions extend beyond the boundaries of the

 

screen. The top and bottom of the 16:9 image becomes

 

black.

Wide

Projects to fill the full width with the entire image at 16:9.

 

(This feature is used to project a squeezed image in a

 

proper aspect ratio.)

Zoom

Projects only the 4:3 portion within 16:9 image to fill the

 

screen. (Portion that extend off screen is cut.)

Input Signal

Auto

Direct

Real

The setting is higher than the display reso-

lution of the projector.

The setting is lower than the display reso- lution of the projector.

Aspect ratio selection

Auto

Wide

Zoom

4:3 screen

16:9 screen

Note:

Please note that using this monitor for the purpose of commercial gain or the attraction of public attention in a venue such as a coffee shop or hotel and projecting a 4:3 screen in wide mode or leaving a squeezed screen as a compressed image raises concern about the infringement of the copyright holder’s rights which are protected by copyright law.

Note:

When selection has been made for the “Real” setting of the personal computer signal (i.e., when the input signal and the projector display resolution are high) and the “Zoom” setting of the video signal, pressing the SELECT (￿￿￿￿) buttons on the remote control will permit movement of the display position. Note that there will not be any movement when the menu or the quick menu is displayed.

The “Real” setting under “Aspect” for digital RGB signals can only be adjusted when the input signal is of XGA size or smaller.

Filter

This function sets the sharpness when the input signal is adjusted to the resolution of the projector and enlarged or reduced.

Select the item name “Filter” and select the setting contents with the SELECT (￿￿) buttons.

Smaller numerical values result in a sharper picture and larger values result in a softer picture. Please select your desired setting value.

E-49

Page 49
Image 49
PLUS Vision U7-132SF, U7-132HSF, U7-137SF user manual View, Aspect, Filter, Personal Computer Signal, Video Signals