PLUS Vision V-1080 Position the projector, Connect the video equipment and personal computer

The Procedure Up to Projecting to the Screen

Perform setup adjustments in the following order.

1 Position the projector

See "Projection Distance and Screen Size" on Pages E-16 and E-17.

Determine the locations to set up the screen and the projector.

2 Connect the video equipment and personal computer

Connect your equipment to the projector.

When the personal computer has a DVI connector or a mini D-sub 15-pin connector See "Connections with PC Connectors" on Page E-18.

When the video equipment has a video connector or an S-video connector See "Connections with Mini D-Sub 15-Pin Connectors" on Page E-19.

When the video equipment has a YCbCr connector or a YPbPr connector

See "Connections with Component Signals" on Page E-22.

When playing the audio through the built-in speaker of the projector

See "Connections with the AUDIO Jack" on Page E-23.

3 Connecting the power cable and switching on the power

See "Operating" on Page E-24.

See "Finishing" on Page E-25.

4 Switching on the power of the personal computer and video equipment

5 Properly adjust the projection image to the screen

See "Projection Screen Position Adjustment" on Page E-26.

6

7

8

Focusing

See "Focus Adjustment" on Page E-27.

Selecting input equipment

See "Input Selection" on Page E-28.

Adjust the screen or video image

Adjust the image to the optimum condition as required. See the Table of Contents for the adjustment items.

Note

*Please purchase a screen.

*A DVI-D cable (order code 28-697), which is available separately, is required for connections with the DVI connector of the personal computer.

*A component cable (order code 28-698), which is available separately, is required to connect a DVD player or other equipment with YCbCr connectors.

*A component cable (order code 28-690), which is available separately, is required to connect high definition (HD) video equipment or other equipment with YPbPr connectors.

E-15