PLUS Vision V-807, V-1080 Picture in Picture, Keystone Save, Size Settings, Position Settings

View

Keystone Save

This function is used to save the keystone adjustment values.

Setting Keystone Save to on will set the previous keystone adjustment values when projecting after the power cable has been disconnected and then reconnected.

1.Select item name "Keystone" and press the cursor () but- ton. The sub menu will open.

2.Select "Keystone Save" with the cursor (▲▼ ) buttons and

set with the cursor ( ) buttons (or with the main unit () button).

AspectAuto

Filter3

Projection

V Keystone		0	–		+
H Keystone	0		–		+
Keystone Save				Off

Off	The keystone adjustment values return to the initial values when the power cable is unplugged.
On	The keystone adjustment values are retained in storage even when the power cable has been unplugged.

Note

Regardless of whether Keystone Save is set to "On" or "Off", when projection is from the standby condition, the picture is projected using the previous keystone adjustment values.

Picture in Picture

This function displays the picture from the VIDEO jack as a sub-picture on the input screen (i.e., the main picture) from the PC connector.

1.Select item name "Picture in Picture" and press the cursor () button. The sub menu will open.

2.Select "Size" or "Position" with the cursor (▲▼ ) buttons and set with the cursor ( ) buttons (or with the main unit () button).

Size Settings

Small Medium Large

AspectAuto

Filter3

Projection

Keystone

Picture in Picture

AspectAuto

Filter3

Projection

Keystone

Picture in Size Off

Position

Off

Sub-picture

Main picture

Position Settings

Display at upper left of main screen

Display at upper right of main screen

Display at center of main screen

Display at lower left of main screen

Display at lower right of main screen

Note

•Sizes of a sub-picture vary depending on the signal input to the PC connector.

•The adjustment display and picture will not appear unless a signal is input to the PC connector.

•Some types of signal for a main picture cannot be set to "Small" or "Large".

E-54