PLUS Vision V-807, V-1080 Auto Power Off, On Screen, Setup, Operation when Function is On

Setup

Auto Power Off

This function switches off the projector power automatically when the input of the projector enters a no-signal condition.

Select item name "Auto Power Off" and select the setting con- tents with the cursor ( ) buttons.

On	The power is switched off when there is no signal.
Off	The power is not switch off even when there is no signal.

Operation when Function is On

*The "No Signal Power Off" display appears when a no-signal condition continues for approximately 10 seconds. The power is switched off about 5 minutes after this.

*If a signal is input during the appearance of the display and an operation button other than the POWER button is pressed, the display is closed and the function is cancelled.

Language

Auto Source	On
Auto Power Off	Off
On Screen	On
Menu Position
YPbPr	Disable
Background	Black

No Signal

Power Off

Note

Some video decks and other equipment output a blue background or other video when playback ends. When this happens, a signal is being input to the projector and Auto Power Off is not activated.

On Screen

This function switches on or off messages that are displayed in a black frame.

Select item name "On Screen" and select the setting contents with the cursor ( ) buttons.

On	The message is displayed.
Off	The message is not displayed.

Note

Even when set to off, messages that are not in a black frame will be displayed.

Language

Auto Source	On
Auto Power Off	Off
On Screen	On
Menu Position
YPbPr	Disable
Background	Black

Example of a display when the ASPECT button is pressed

Wide

E-56