PLUS Vision V-807 Adjustment of the Projection Screen, Projection Screen Position Adjustment

Adjustment of the Projection Screen

Switch on the power of the connected equipment and make the adjustments with the video signal being input to the projector.

Projection Screen Position Adjustment

Adjust the projection image to the screen.

Check that the screen is set level and vertically.

(1)If the image is shifted to the left or right, move the main unit horizontally. (Align the center of the screen and the center of the lens of the main unit.)

(2)If the image is shifted vertically, move the image up or down with the adjuster. See "Making Adjust- ments with the Adjusters" on Page E-27.

(3)If the image is slanted, adjust by turning the right or left front adjuster. See "Making Adjustments with the Adjusters" on Page E-27.

(4)A projection image such as that illustrated in the diagram is the result of the projector not being perpendicular to the screen. Set the projector so that it is pointing straight toward the screen.

(5)If the image shows keystone distortion, adjust using remote control or menu operations. See "Cor- recting Keystone Distortion of the Projection Image" on Page E-34.

(1)

(3)

(2)

(4)

(5)

Note

The projection image can be turned upside down or turned left to right using menu operations. See "Projection" on Page E-52.

E-26