PLUS Vision V-807, V-1080 user manual Placement Guide, Screen Size and Projection Distance, Height

Placement Guide

●Use this information as a guide to find out about the screen size when the projector is placed at a certain location, or to find out the approximate size of a screen that will be required.

●The projection distance over which focussing is adjustable is 1.2 m (3.9 feet) to 6.9 m (22.6 feet) from the front of the main unit lens for V-807 and 1.2 m (3.9 feet) to 6.6 m (21.7 feet) for V-1080. The projector should be placed within this range.

●Please see the projection distance table for the model of projector that you have purchased.

V-807 Screen Size and Projection Distance

m (feet)Height from center of lens to top edge of the projection

4.0(13.1)

													200"
3.5(11.5)												180"
3.0(9.8)										150"
2.5(8.1)								120"								Height
2.0(6.6)							100"								h1
					80"
																Screen
1.5(4.9)				60"
1.0(3.3)			40"
		35"
0.5(1.6)															h2
								17.2˚ Projection angle
0	0.5	1.0	1.5	2.0	2.5	3.0	3.5	4.0	4.5	5.0	5.5	6.0	6.5	7.0	(m)
	(1.6)	(3.3)	(4.9)	(6.6)	(8.1)	(9.8)	(11.5)	(13.1)	(14.8)	(16.4)	(18.0)	(19.7)	(21.3)	(23.0)	(feet)

	Center of lens		Projection Distance				Height from center of lens to
							bottom edge of the projection
Screen Size	Screen Size	Width x Height		Projection Distance		Height h1			Height h2
Designation (Inches)	(m)		(feet)	(m)	(feet)	(m)		(feet)	(m)	(feet)
35"	0.71 0.53		2.33 1.74	1.20	3.94	0.64		2.10	0.11	0.36
40"	0.81 0.61		2.66 2.00	1.37	4.49	0.73		2.40	0.12	0.39
60"	1.22 0.91		4.00 2.99	2.06	6.76	1.09		3.58	0.18	0.59
80"	1.63 1.22		5.35 4.00	2.75	9.02	1.46		4.79	0.24	0.79
100"	2.02 1.52		6.63 4.99	3.43	11.25	1.82		5.97	0.30	0.98
120"	2.44 1.83		8.00 6.00	4.12	13.52	2.19		7.19	0.36	1.18
150"	3.05 2.29		10.00 7.51	5.15	16.90	2.74		8.99	0.45	1.48
180"	3.66 2.74		12.00 8.99	6.18	20.28	3.29		10.79	0.54	1.77
200"	4.06 3.05		13.32 10.00	6.87	22.54	3.65		11.98	0.60	1.97

*There is a tolerance of ±5% due to design values.

*This table uses the lens apex and lens center as references and requires that the projec- tor be in a horizontal condition (with front and rear adjusters fully withdrawn).

E-16