Hull, Drain Plugs and Bilge, Riding Gear | Polaris 2003 MSX guide

Pre-Operation Inspection

Hull

Use a non-abrasive cleaner to remove any marine growth and inspect the hull for cracks or damage. Do not operate the watercraft if the hull is damaged.

Drain Plugs and Bilge

Turn each bilge drain plug (1) counterclockwise and remove it. Clean the plug and plug hole of any sand and debris before reinstalling. Do not operate the watercraft if any drain plug is loose or

missing.1

When the watercraft is out of the

water, remove the drain plugs and carefully flush out the bilge with fresh water. Allow the bilge to drain completely. Wipe out the bilge with dry shop towels and reinstall the drain plugs. After launching the craft, remove the seat and check for leaks.

OPERATION

Riding Gear

Be sure all operators and passengers have the appropriate riding gear, including a PFD (see page 16). Make sure all trailing objects are securely tied back or stowed.

WARNING

Objects trailing from a person in the water or from the watercraft can easily become entangled in the jet pump impeller and cause severe injury or death. Make sure long hair, straps, ropes, clothing and similar objects are tied back and secured.

47

Image 49

Polaris 2003 MSX owner manual Hull, Drain Plugs and Bilge, Riding Gear

Contents

MSX Page We’ve created a web site, just for YOU Page Polaris Recreational Vehicles WelcomePolaris Professional Series Workmobilest Table of Contents Do Your Part Your Responsibilities Age Restrictions Maintenance Requirements Identification Numbers Signal Words and Symbols Safety Safety Decals Safety To Avoid Collisions Righting Capsized Boat Located on the engine water manifold Informational Decals Operator Guidelines Operator Safety Safety Personal Floatation Device Safe Riding GearEye Protection Suit/Shoes/Gloves Overloading the Watercraft Fire Safety Protective Apparel Weather and Darkness Obstacles and Shallow Water Turning and Accelerating Service and MaintenancePre-Operation Check Electrical Shock Hazard Jet Pump Water Intake SafetySafe Riding Position Lifting the Watercraft Operator Fitness Operator AwarenessBoating Under the Influence Operator Fatigue and Dehydration Vehicle ModificationsHypothermia To avoid hypothermia Exhaust Outlet Reverse Gate Features and Controls 911 Reverse Operation Handle Features and Controls Engine Components under seat Engine Components New Generation Instrument NGI Accessible FunctionsPrimary Functions Function Overview Instrument Operation Display Mode Check Engine Display Warnings RPM Limiter Standard Equipment AccessoriesOptional Equipment EPA Emissions Regulations EmissionsCalifornia Star Labels Two Stars Very Low Emission One Star Low EmissionThree Stars Ultra Low Emission Pre-Operation Inspection Operation What To Do Fuel Refueling Oil Ride Plate Impeller Drive Shaft Jet Pump Intake Throttle SteeringEngine and Storage Compartments Seat Loose PartsFire Extinguisher Battery Drain Plugs and Bilge HullRiding Gear Switches/Buttons Principles of Operation Engine Break-in Procedure Operation Right-of-way and Give-way Navigational RulesStand-on Vessel Give-way Vessel Encountering Vessels RuleMeeting Vessels Crossing Paths Overtaking Vessels Fishing Vessel Right-of-Way Non-Motorized Craft Reading Buoys and Markers Avoid CollisionsLaunch Ramp Etiquette Stopping the Engine Launching the Watercraft Starting the Engine Before Starting the Engine If the Engine Doesn’t Start Boarding and Starting in Deep Water Operator Only Boarding the Watercraft Boarding With a Passenger Turning the Watercraft Reverse Operation Stopping the Watercraft Beaching the Watercraft Operating in Rough Conditions Towing a Disabled Watercraft Righting a Capsized Watercraft Operating With Passengers Daily Care Post Operation Maintenance Operation Temporary Storage Transporting The Watercraft Submerged Waterlogged Engine Anti-Corrosion Treatment Engine Water Removal Procedure General Maintenance Maintenance and Lubrication Maintenance Schedule Key Periodic Maintenance Schedule Description Fuel System Hull / Deck / Steering / Controls Lubrication Steering Cable Joints and Inner WireThrottle Cable Drive Line Throttle Body And Oil Injection Pump Seat Latch And Hooks Steering Nozzle Pivot ShaftElectrical Connections Steering Handle Pivot Shaft Spark Plugs Maintenance and Lubrication Hull and Deck Care Polaris VES II Synthetic Lubricant OilPolaris Premium Gold Synthetic Lubricant Polaris Nature Oil Synthetic Lubricant Fuses Steering Cable InspectionThrottle Cable Inspection Battery Maintenance and Charging BatteryReplenishing Battery Fluid Antidote Battery Removal Battery Charging Battery Storage Battery Installation Jet Pump Water Inlet Screen Salt Water and Unclean Water Care Cooling System Flushing Engine and Exhaust System Draining Extended Storage Watercraft Engine Fogging Procedure Cleaning Lubrication Engine Doesn’t Turn Over Engine TroubleshootingEngine Turns Over But Doesn’t Start Engine Runs Irregularly, Stalls or Misfires Possible Weak Spark Cause Solution Engine Backfires Engine Overheats Engine Pings or Knocks Engine Loses Power Unusual Noise or Vibration From Propulsion System Engine RPM is Too High With Limited Speed Oil and Lubricants Polaris Products Capacities / Dimensions Specifications Propulsion Obtaining Service and Warranty Assistance Warranty Warranty Policy Engine Oil HOW to Obtain Warranty Service Polaris Watercraft Engines California Emission Control System Limited Warranty OWNER’S Warranty Responsibilities 109 Emissions Index 111