OPERATION
Pre-Operation Inspection
Steering
Check the handlebars for free movement throughout their full range. Make sure the jet pump outlet nozzle changes direction as the handlebars are turned from left to right and vice versa.
Be sure the handlebars and handlebar grips fit snuggly. Visually inspect the control cable to ensure that it’s in working condition.
Throttle
Always check throttle operation prior to starting the engine.
Pull or squeeze the throttle several times to be sure the throttle lever
moves freely through its full range. It should spring back to its original position when released.
Engine and Storage Compartments
If the craft is operated in salt water, spray the inside of the hull (engine and components) with waterproof lubricant spray after every use. See page 101 for part numbers of Polaris products.
The engine compartment is located beneath the seat.
Be sure the seat, engine cover and front compartment door are properly positioned and securely latched before operating the watercraft.
44
