Polaris P3000iE manual Pre-Operationinspection, Engine Oil, Fuel Line, Fuel Level, Exhaust System

Models: P3000iE

1 81
Download 81 pages 53.64 Kb
Page 27
Image 27
PRE-OPERATION INSPECTION

PRE-OPERATION INSPECTION

Note: Always perform the recommended pre-operation inspections before each use. Always perform the inspections at the beginning of a project and when removing the generator from storage.

Failure to perform the recommended pre-operation inspections could result in minor or moderate injury or property damage. When inspection reveals the need for adjustment, replacement, or repair, perform service promptly or visit your authorized POLARIS supplier for assistance.

Pre-Operation Checklist

Open the service door to expose the generator inner components. See page 46.

Engine Oil

Perform “Oil Level Inspection”. Add oil as needed. See page 49.

Fuel Line

Petrol is highly flammable and explosive and can cause serious injury. Stop the engine and keep heat, sparks, and flame away. Handle fuel only outdoors. Wipe up spills immediately.

Inspect the fuel hose for cracks or damage. Replace as needed.

Fuel Level

Check the fuel level and refuel as needed. See page 27.

Exhaust System

If the engine has been running, the muffler will be very hot. Allow the muffler to cool before servicing.

Inspect the exhaust system for leakage. Tighten or replace the gasket as needed.

Carburetor

Inspect the choke knob operation.

Air Filters

Inspect the air filters. Clean or replace as needed. See page 52.

26

Page 27
Image 27
Polaris P3000iE manual Pre-Operationinspection, Engine Oil, Fuel Line, Fuel Level, Exhaust System, Carburetor, Air Filters