Polaris P3000iE manual DC Operation, Connecting the Battery Charging Cable

Models: P3000iE

1 81
Download 81 pages 53.64 Kb
Page 38
Image 38
Disconnecting the Battery Charging Cable
5A Fuse
Access
Door

OPERATION

Safe Operating Precautions

DC Operation

Connecting the Battery Charging Cable

Do not start the vehicle while the battery charging cable is connected and the generator is running. The vehicle’s charging system or the generator may be damaged.

Note: The DC receptacle is protected from an overload with a fuse. If the DC circuit is overloaded, the 5 amp fuse will blow and power to the DC receptacle will cease. The red light on the DC panel will illuminate. If the DC overload fuse continues to blow, discontinue charging and see your authorized POLARIS generator supplier. The overload fuse does not prevent overcharging the battery. The fuse is located to the left of the receptacle and is accessed by snapping open the access door. Replace the fuse with one of the same capacity. Using a higher rated fuse may cause damage to the generator alternator.

Disconnecting the Battery Charging Cable

1.Stop the generator.

2.Disconnect the black lead of the battery charging cable from the negative (-) battery terminal and then the lead from the positive (+) battery terminal.

3.Unplug the battery charging cable from the DC receptacle.

4.Connect the vehicle battery ground cable to the negative (-) battery terminal.

37

Page 38
Image 38
Polaris P3000iE manual DC Operation, Connecting the Battery Charging Cable, Disconnecting the Battery Charging Cable