Battery

Description

Spare part number

 

 

Battery, 2-cell, 33-WHr, 4.56-AHr, Li-ion (includes cable)

750549-005

 

 

Before removing the battery, follow these steps:

1.Shut down the slate. If you are unsure whether the slate is off or in Hibernation, turn the slate on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the slate.

3.Disconnect the power from the slate by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the slate.

4.Remove the display panel assembly (see Display panel assembly on page 32).

WARNING! To reduce potential safety issues, use only the battery provided with the slate, a replacement battery provided by HP, or a compatible battery purchased from HP.

CAUTION: Removing a battery that is the sole power source for the slate can cause loss of information. To prevent loss of information, save your work or shut down the slate through Windows before removing the battery.

Remove the battery:

1.Disconnect the battery cable (1) from the system board.

2.Remove the six PM1.6×2.5 screws (2) that secure the battery to the bottom cover.

3.Remove the battery (3).

36 Chapter 5 Removal and replacement procedures – slate