3.Remove the fingerprint reader board cable (2).
The fingerprint reader board cable is included in the Keyboard Base Cable Kit, spare part number
Reverse this procedure to install the fingerprint reader board cable.
Kickstand
Description | Spare part number |
|
|
Kickstand (includes rubber feet) | |
|
|
Kickstand Hinge Kit | |
|
|
Before removing the kickstand, follow these steps:
1.Shut down the keyboard base. If you are unsure whether the keyboard base is off or in Hibernation, turn the keyboard base on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the keyboard base.
3.Disconnect the power from the keyboard base by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the keyboard base.
4.Remove the bottom cover (see Bottom cover on page 71).
5.Disconnect the keyboard base battery cable from the keyboard base system board (see Keyboard base battery on page 72).
Remove the kickstand:
1.Remove the four Phillips PM2.0×2.5 broad head screws (1) that secure the kickstand to the top cover.
Kickstand 85
