Fingerprint reader board
Description | Spare part number |
|
|
Fingerprint reader board | |
NOTE: The fingerprint reader board spare part kit does not include the fingerprint reader board cable. |
|
The fingerprint reader board cable is included in the Keyboard Base Cable Kit, spare part number |
|
| |
|
|
Before removing the fingerprint reader board, follow these steps:
1.Shut down the keyboard base. If you are unsure whether the keyboard base is off or in Hibernation, turn the keyboard base on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the keyboard base.
3.Disconnect the power from the keyboard base by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the keyboard base.
4.Remove the bottom cover (see Bottom cover on page 71).
5.Remove the keyboard base battery (see Keyboard base battery on page 72).
Remove the fingerprint reader board:
1.Disconnect the fingerprint reader board cable from the LIF connector (1) on fingerprint reader board.
2.Remove the Phillips PM1.5×2.7 screw (2) that secures the fingerprint reader board and bracket to the top cover.
3.Remove the fingerprint reader board bracket (3).
The fingerprint reader board bracket is included in the Keyboard Base Bracket Kit, spare part number
Fingerprint reader board 77