HP x2 1011 G1 manual For use in Sweden and Finland

For use in country or region:	Spare part number:	For use in country or region:	Spare part number:
For use in France	793738-051	For use in Slovenia	793738-BA1
For use in Germany	793738-041	For use in South Korea	793738-AD1
For use in Greece	793738-151	For use in Spain	793738-071
For use in Hungary	793738-211	For use in Sweden and Finland	793738-B71
For use in Iceland	793738-DD1	For use in Switzerland	793738-111
For use in India	793738-D61	For use in Taiwan	793738-AB1
For use in Israel	793738-BB1	For use in Thailand	793738-281
For use in Italy	793738-061	For use in Turkey	793738-141
For use in Japan	793738-291	For use in the United Kingdom	793738-031
		and Singapore
For use in Latin America	793738-161	For use in the United States	793738-001

Before removing the keyboard, follow these steps:

1.Shut down the keyboard base. If you are unsure whether the keyboard base is off or in Hibernation, turn the keyboard base on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the keyboard base.

3.Disconnect the power from the keyboard base by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the keyboard base.

4.Remove the bottom cover (see Bottom cover on page 71).

5.Remove the keyboard base battery (see Keyboard base battery on page 72).

Remove the keyboard:

1.Disconnect the keyboard backlight cable from the low insertion force (LIF) connector (1) on keyboard base system board.

2.Release the ZIF connector (2) to which the keyboard cable is attached, and then disconnect the keyboard cable from the keyboard base system board.

3.Release the six retention tabs (3) that secure the keyboard to the top cover.

Keyboard 75