7.Release the ZIF connector (3) to which the docking connector board cable is attached, and then disconnect the docking connector board cable from the docking connector board.
8.Remove the docking connector board, audio jack board, and audio jack board cable. Reverse this procedure to install the docking connector board.
Audio jack board
Description | Spare part number |
|
|
Audio jack board (includes cable) | |
|
|
Before removing the audio jack board, follow these steps:
1.Turn off the slate. If you are unsure whether the slate is off or in Hibernation, turn the slate on, and then shut it down through the operating system.
2.Disconnect the power from the slate by unplugging the power cord from the slate.
3.Disconnect all external devices from the slate.
4.Remove the display panel assembly (see Display panel assembly on page 32).
5.Remove the battery (see Battery on page 36).
6.Remove the docking connector board (see Docking connector board on page 46).
Remove the audio jack board:
1.Release the ZIF connector (1) to which the audio jack board cable is attached, and then disconnect the audio jack board cable from the docking connector board.
48 Chapter 5 Removal and replacement procedures – slate
