1.Disconnect the power connector cable (1) from the keyboard base system board.
2.Remove the two Phillips PM2.0×3.6 screws (2) that secure the power connector cable bracket to the top cover.
3.Remove the power connector cable bracket (3).
The power connector cable bracket is included in the Keyboard Base Bracket Kit, spare part number
4.Remove the Phillips PM1.5×2.7 screw (4) that secures the power connector to the top cover.
5.Remove the power connector cable (5).
Reverse this procedure to install the power connector cable.
Keyboard
For use in country or region: | Spare part number: | For use in country or region: | Spare part number: |
|
|
| |
| Keyboard (includes keyboard cable and keyboard backlight cable): |
| |
|
|
|
|
For use in Belgium | For use in the Netherlands | ||
|
|
|
|
For use in Brazil | For use in North Africa | ||
|
|
|
|
For use in Bulgaria | For use in Portugal | ||
|
|
|
|
For use in Canada | For use in Romania | ||
|
|
|
|
For use in the Czech Republic | For use in Russia | ||
and Slovakia |
|
|
|
|
|
|
|
For use in Denmark | For use in Saudi Arabia | ||
|
|
|
|
74 Chapter 6 Removal and replacement procedures – Keyboard base
