Polaris RZR XP 4 900, RZR XP 900 owner manual Maintenance, Headlight Beam Adjustment

MAINTENANCE

Lights

Headlight Beam Adjustment

The headlight beam can be adjusted slightly upward or downward and to the left or right.

1.Position the vehicle on a level surface. The headlight should be approximately 25 ft. (7.6 m) from a wall.

25 ft.

(7.6 m)

XX

2 in. (5 cm)

2.Place the transmission in PARK.

3.Measure the distance from the floor to the center of the headlight and make a mark on the wall at the same height.

4.Apply the brakes. Start the engine. Turn the headlights to high beam.

5.Include the weight of a rider on the seat while performing this step. Observe the headlight aim. As a starting point, the most intense part of the head- light beam should be 2 inches (5 cm) below the mark on the wall. Adjust to operator prefer- ence.

6.Tighten or loosen the three (3) headlight screws to adjust the beam upward or downward or to the left or right.

Adjustment

Screws

108