Polaris RZR XP 4 900 Maintenance, Front/Rear Spring Preload, Fox Shock Preload Adjustment

MAINTENANCE

Suspension Settings

Front/Rear Spring Preload

Fox Shock Preload Adjustment

Follow these guidelines if you make adjustments to this suspension.

•Always return the suspension to the factory setting after the load is removed from the vehicle. The increased suspension height will negatively impact vehi- cle stability when operating without a load.

•Always apply the same adjustment setting to all four wheels.

•Do not increase the spring preload by more than one inch (25.4 mm) over the factory setting.

1.Use the shock/clutch tool from the tool kit to aid in making suspension adjustments.

2.Elevate the vehicle to allow the suspension to fully extend.

3.Loosen the jam nut and back it away from the adjusting ring.

1 2

4.Turn the adjusting ring to the left (1) to increase preload for a stiffer ride. Turn the adjusting ring to the right (2) to decrease preload for a softer ride.

WARNING! Uneven adjustment may cause poor handling of the vehicle, which could result in an accident. Always adjust both the left and right spring preloads equally or have your POLARIS dealer perform the adjustments.

Adjusting

Ring

5. Tighten the jam nut firmly against the adjuster ring.

102