Polaris RZR XP 900, RZR XP 4 900 Features And Controls, Seat Belts, Seat Belt Inspection

FEATURES AND CONTROLS

Seat Belts

This POLARIS vehicle is equipped with three-point lap and diagonal seat belts for all riders. Always make sure the seat belts are secured for the operator and all passengers before riding.

To wear the seat belt properly, follow this procedure:

1.Pull the seat belt latch downward and across your chest toward the buckle at the inner edge of the seat. The belt should fit snugly across your hips and diagonally across your chest. Make sure the belt is not twisted.

2.Push the latch plate into the buckle until it clicks.

3.Release the strap, it will self-tighten.

4.Press the red release latch on the buckle to release the seat belt.

Seat Belt Inspection

Inspect all seat belts for proper operation before each use of the vehicle.

1.Push the latch plate into the buckle until it clicks. The latch plate must slide smoothly into the buckle. A click indicates that it's securely latched.

2.Push the red release latch in the middle of the buckle to make sure it releases freely.

3.Pull each seat belt completely out and inspect the full length for any damage, including cuts, wear, fraying or stiffness. If any damage is found, or if the seat belt does not operate properly, have the seat belt system checked and/or replaced by an authorized POLARIS dealer.

4.To clean dirt or debris from the seat belts, sponge the straps with mild soap and water. Do not use bleach, dye or household deter- gents. Rinse the entire length of the belt webbing. Use a garden hose to flush out the retractor and latch housings regularly.

37