c.Select Properties to open the Polaroid Photo Printer Parallel Properties window.
You may need to change the film type, enable or disable preview mode, enable or disable IQA Technology, change the number of copies, or change the intensity of the image.
d.Click OK.
5.Enter a description (limit of 45 alphanumeric characters and spaces) of your image in the Description field.
The description appears below your printed image. If you do not want to print a description of the image, leave this space blank. The description does not print on your image if the image fills the entire image area on the film.
6.Enter the number of copies you want to print in the Copies field.
7.Select your image and drag it to where you want it to appear on the picture. You can select
8.Drag the Output slider to set the size of your printed image.
Note: For the best results, set the dpi to 160. The larger the image, the lower the resolution and quality of the printed image.
9.Click Print.
If Using Preview is selected on the Graphics tab on the Polaroid Photo Printer Parallel Properties window, a preview of your image appears (go to step 10):
37
