Cannot take a picture
Flash does not work
∙Wait until the green LED next to the optical viewfinder stops blinking.
∙If you have taken the maximum number of images, transfer the images to your computer and delete the images from memory.
∙Make sure the memory card is inserted correctly in the memory compartment.
∙If the camera is connected to your computer, use the software controls to take a picture, or disconnect the camera from the computer.
∙Check the flash mode icon on the Status panel. Cycle through the flash options to turn on the flash if it was disabled.
∙Wait until the green LED next to the optical viewfinder stops blinking.
∙Replace the batteries.
No signal on the TV monitor while the camera is on
Use the specified cable to connect the camera and the TV monitor.
53
