Polycom® RealPresence Collaboration ServerVirtual Edition Administrator’s Guide
20-26 Polycom, Inc.
PRESERVE_PARTY_CELL_
ON_FORCE_LAYOUT
Used to prevent reassignment of cells in a forced layout that
were assigned to endpoints that have disconnected, paused
their video, or have been removed from the conference. The
cell will remain black until the endpoint reconnects or a new
layout is used, or the conference ends.
Range: YES / NO
Default: NO
•NO - Cells of dropped endpoints are reassigned.
Endpoints that reconnect will be treated as new endpoints.
•YES - Cells of dropped endpoints are not reassigned, but
will be reserved until the endpoint reconnects.
For information see the Polycom® RealPresence
Collaboration Server Virtual Edition Getting Started Guide,
"Force Layout and Preserve Participant Call” on page 3-62.
QOS_IP_AUDIO Used to select the priority of audio packets when DiffServ is
the is the selected method for packet priority encoding.
Default: 0x31
QOS_IP_VIDEO Used to select the priority of video packets when DiffServ is
the is the selected method for packet priority encoding.
Default: 0x31
QOS_MANAGEMENT_NET
WORK
Enter the DSCP value for the RMX Management Network.
Default: 0x10
Range: 0x00 - 0x3F
REDUCE_CAPS_FOR_RED
COM_SIP
To accommodate deployments where some devices have
limits on the size of the SDP payload in SIP messages (such
as LSCs from Redcom running older software versions), when
the flag value = YES, the SDP size is less than 2kb and
includes only one audio and one video media line.
Default: NO
REDIAL_INTERVAL_IN_SEC
ONDS
Enter the number of seconds that the Collaboration Server
should wait before successive re dialing attempts.
Range: 0-30 (Default: 10)
REDUCE_CAPS_FOR_RED
COM_SIP
To accommodate Redcom’s SDP size limit, when the flag
value = YES, the SDP size is less than 2kb and includes only
one audio and one video media line.
Default: NO
REJECT_INCORRECT_PRE
CEDENCE_DOMAIN_NAME
When set to YES, when the Precedence Domain of a SIP dial-
in call does not match the Precedence Domain of the RMX,
the call is rejected. Possible values: YES/NO
Default: No
Table 20-2 Manually Added System Flags – MCMS_PARAMETERS (Continued)
Flag Description