![](/images/new-backgrounds/1107115/107115101x1.webp)
Release Notes - SIP Application | Changes |
•16161: Phone with a shared line displays the wrong soft key labels after attempting to hot dial when the remote shared line is in use
2.17.4 Configuration File Parameter Changes
.cfg | Action | Parameter | Description |
File |
|
|
|
sip | added | call.shared.exposeAutoHolds | call.shared.exposeAutoHolds="1" means |
|
|
| that on a shared line, when setting up a |
|
|
| conference, a |
|
|
| server. |
|
|
| call.shared.exposeAutoHolds="0" means no |
|
|
| |
|
|
| Default is “0”. |
2.18 Version 1.6.5
2.18.1 Added or Changed Features
•8072: Added support for Nortel MCP NAT traversal
•11805: Changed behavior when a local conference is terminated. The remote conference legs are transferred so that the remote parties can continue the conversation.
•13193: Added configuration options to allow configuration file parameters to override DHCP values for SNTP server address and GMT offset
•13527: Added support for setting SIP server address from DHCP option 151
•13509: Added allowing reg.x.address to contain host part instead of being a user part only
•13492: CA certificate expiry is no longer checked if SNTP has not been configured
•14052: Added flash parameter for SoundPoint IP 601phones to toggle power requirements in CDP between 5W (no Expansion Modules can be connected) and 12W (three Expansion Modules can be connected) with a default setting of 5W
This “EM Power” flash parameter is accessible when the SIP application is running under the Network Configuration menu. Note that no Expansion Modules can be connected to the phone when the “EM Power” parameter is disabled. The default setting for this parameter is Enabled (i.e. 12W power requirement). In order for the correct CDP power requirements to be reported at boot time as well, bootROM version 3.1.3 is required. See Tech Bulletin TB14052 for details on how to use this feature.
•14886: Changed power reported via CDP to platform-specific values
In order for these CDP power requirements to be reported at boot time as well, bootROM version 3.1.3 is required.
Copyright © 2007 Polycom, Inc. | Page 45 |