Polycom 3804-11530-222 manual Configuration File Parameter Changes

Models: 3804-11530-222

1 68
Download 68 pages 12.81 Kb
Page 47
Image 47

Release Notes - SIP Application

Changes

16075: Phone plays re-order tone when taking call off hold in specific scenario

16100: BLA line key status is not maintained in specific scenario

16116: Cannot register lines 7 to 12 from SIP configuration menu

16149: Line key LEDs for BLA lines can switch from one line key to another in specific scenario

16250: Comfort noise received by phone is handled incorrectly

16374: Phone keeps sending NOTIFY if 481 received in early NOTIFY

16388: Removed DC bias from Tx signal

16429: Web interface does not have configuration options for lines 7 to 12

16459: Phone is unable to park a call that is received via ACD final destination

16480: BLA Led gets stuck and there is a phantom NOTIFY from the phone in a particular scenario.

16485: Notify Talk is ignored if interval between it and 180 is too brief

16565: Dialed digits can be lost if they are dialed too quickly after selecting an

SCA line

16599: SoundPoint IP 300 and 301 phones reboot when using G.729 codec in a conference call with SIP 1.6.6 C software

16660: Failover to backup SIP server does not occur when hostname of primary cannot be resolved via DNS

16691: Dialog does not get removed after its expiration time in some scenarios. This addresses #16374 and #16480.

16813: Going on and off hook repeatedly on a shared line may result in the line showing an active call state when the handset is physically on-hook

16915: Phone sends SIP requests to port 5060 regardless of voIpProt.SIP.outboundProxy.port configuration setting

17014: When a shared line call is on hold, using on-hook dialing seizes the last used line instead of the first available line

17284: An unnecessary ACK is sent by the phone if no reply is received within 32 seconds

2.14.4 Configuration File Parameter Changes

.cfg

Action

Parameter

Description

File

 

 

 

sip

added

voIpProt.SDP.answer.useLocalPreferences

Can be 0 or 1. Use this new parameter to

 

 

 

have the phone use its own preference

 

 

 

list when deciding which codec to use

 

 

 

rather than the preference list in the offer.

 

 

 

Null default = 0 = disabled.

Copyright © 2007 Polycom, Inc.

Page 41

Page 47
Image 47
Polycom 3804-11530-222 manual Configuration File Parameter Changes