Polycom 3804-11530-222 manual Configuration File Parameter Changes

Release Notes - SIP Application Changes

•15679: Ring Type 12 (Ringback-style) sounds incomplete after the first ring

•15694: Phone crashes and reboots when 'Exit' is pressed from Network

Configuration menu in Korean Language

•15730: If a menu is displayed when a call is missed on the SoundPoint IP 300 and 301 phones, the missed call count is not updated on the idle display

•15766: Display is incorrect after selecting name dialing then entering and exiting a call list while dial tone is playing

•15781: After putting a local conference on hold then splitting the calls then joining them, the first call may remain on hold

•15855: In the Instant Msg menu of the SoundPoint IP 300 and 301 phones, "x/Ascii" is not displayed after pressing the "1/A/a" softkey

2.13.4 Configuration File Parameter Changes

.cfg	Action	Parameter	Description
File
sip	added	voIpProt.server.x.expires.overlap	The number of seconds before the
			expiration time returned by server ‘x’ at
			which the phone should try to re-register.
			The phone will try to re-register at half the
			expiration time returned by the server if that
			value is less than the configured overlap
			value.
			Default = 60. Minimum = 5, maximum =
			65535.
sip	added	voIpProt.SIP.ms-forking	Default = 0. Can be 0 or 1.
			0 = Support for MS-forking is disabled.
			1 = Support for MS-forking is enabled and
			the phone will reject all Instant Message
			INVITEs. This parameter is relevant for LCS
			server installations.
			Note that if any endpoint registered to the
			same account has MS-forking
			disabled, all other endpoints default back to
			non-forking mode. Windows Messenger
			does not use MS-forking so be aware of this
			behavior if one of the endpoints is Windows
			Messenger.
sip	added	voIpProt.SIP.dialog.usePvalue	Default = 0. Can be 0 or 1.
			0 = Phone uses “pval” field name in Dialog.
			This obeys the draft-ietf-sipping-dialog-
			package-06.txt draft.
			1 = Phone uses a field name of “pvalue”.
sip	added	voIpProt.SIP.connectionReuse.useAli	Default = 0. Can be 0 or 1.
		as	0 = old behaviour
			1 = Phone uses the connection reuse draft
			which introduces "alias".
sip	added	se.pat.callProg.15.name="secondary	Same configuration method as primary dial
		dial"	tone. Allows a different tone to be
		se.pat.callProg.15.inst.1.type="chord"	configured for secondary dial tone.
		se.pat.callProg.15.inst.1.value="1"

Copyright © 2007 Polycom, Inc. Page 37