Allied Telesis AT-S110, AT-GS950/10PS manual Static Unicast MAC Address Configuration

Chapter 10: MAC Address Table

Static Unicast MAC Address Configuration

This procedure explains how to set the static multicast feature for each port on the AT-GS950/10PS switch. Before beginning this procedure, you must create either an 802.1Q VLAN ID or a Port-Based VLAN Index. For information about defining these parameters, see:

“Tagged VLAN Configuration” on page 157 regarding the 802.1Q VLAN ID parameter.

“Port-Based VLAN Configuration” on page 164 regarding the Port- Based VLAN Index parameter.

To add a static MAC address to the switch, perform the following procedure:

1.From the main menu on the left side of the page, select the Bridge folder.

The Bridge folder expands.

2.From the Bridge folder, select Static Unicast.

The Static Unicast Address Table Page is displayed. See Figure 38.

Figure 38. AT-GS950/10PS Static Unicast Address Table Page

3.Select either the 802.1Q VLAN ID or Port-Based VLAN Index radio button and enter the respective VLAN ID (1-4000) or VLAN Index (1 - 52).

126