Allied Telesis AT-S110 manual Port Settings, Enable The Restricted Vlan Registration is active for

Chapter 14: GVRP

Port Settings

Perform the following procedure to configure the GVRP port settings:

1.From the main menu on the left side of the page, select Bridge. The Bridge folder expands.

2.From the Bridge folder, select GVRP. The GVRP folder expands.

3.From the GVRP folder, select Port Setting.

A partial view of the AT-GS950/10PS Port Settings Page is displayed. See Figure 57.

Figure 57. GVRP Port Setting Page

4. The following fields are listed for each port:

Port - This parameter displays the ports on the switch.

Dynamic Vlan Status - This parameter defines the GVRP status of the port. From the Dynamic Vlan Status field, select one of the following choices from the pull-down menu:

Ignore - This parameter indicates that the setting in the All row does not apply to the Dynamic Vlan Status field. In other words, each port is set individually.

Enable - The Dynamic Vlan is activated for the port row selected.

Disable - The Dynamic Vlan is de-active for the port row selected.

Restricted VLAN Registration - This parameter controls if the

VLAN registration on the port is restricted or not.

Ignore - This parameter indicates that the setting in the All row does not apply to the Restricted VLAN Registration field. In other words, each port is set individually.

Enable - The Restricted VLAN Registration is active for the

170