Allied Telesis AT-GS950/10PS, AT-S110 Modifying SNMPv3 View Names, Deleting SNMPv3 View Names

Modifying

SNMPv3 View

Names

Deleting SNMPv3 View Names

AT-GS950/10PS Switch Web Interface User’s Guide

If you need to modify an entry in the SNMP Group Access page, you must first delete the entry and then re-enter it. For information about how to delete an entry in this table, see “Deleting SNMPv3 View Names” on page 211. For information about how to create a new entry in this table, see “Creating SNMPv3 View Names” on page 209.

This procedure explains how to delete an entry on the SNMP Group Access Table page.

1.From the main menu on the left side of the page, select the SNMP folder.

The SNMP folder expands.

2.From the SNMP folder, select SNMP Access Table.

The SNMP Group Access Table page is displayed. See Figure 72 on page 209.

3.In the Action column of the table, click Delete for the View Name that you want to remove.

Note

The views corresponding to the ReadOnly and ReadWrite Group Names are default values and cannot be removed.

4.From the main menu on the left side of the page, select Save Configuration to Flash to permanently save your changes.

211