Chapter 3: Port Configuration
60
notify the end node to stop transmitting for a specified period of
time. The possible values are:
Ignore - This parameter indicates that the All setting does not
apply to the Flow Control field. In other words, each port is set
individually.
Enabled - This parameter indicates that the port is permitted to
use flow control.
Disabled - This parameter indicates that the port is not
permitted to use flow control.
EAP Pass - This parameter reflects the current Extensible
Authentication Protocol (EAP) setting on the port. The possible
values are:
Ignore - This parameter indicates that the All setting does not
apply to the EAP Pass field. In other words, each port is set
individually.
Enabled - This parameter indicates that the port is able to send
and receive EAP packets.
Disabled - This parameter indicates that the port is disabled
and is not able to send or receive EAP packets.
BPDU - This parameter reflects the current BPDU setting on the
port.The possible values are:
Ignore - This parameter indicates that the All setting does not
apply to the BPDU field. In other words, each port is set
individually.
Enabled - This parameter indicates that the switch will pass
BPDU frames through the switch and broadcast them through
all other ports.
Disabled - This parameter indicates that the switch will not pass
BPDU frames through the switch, With RSTP or STP enabled,
the switch will receive BPDU frames and process them
according to the spanning tree protocol.
3. From the main menu on the left side of the page, select Save
Configuration to Flash to permanently save your changes.