AT-GS950/10PS Switch Web Interface User’s Guide
287
Note
See Table 6 on page 284 for a definition of the PD PoE classes.
Priority - Indicates the port priority: Low, High, or Critical. For more
details, see “Port Prioritization” on page 285.
Power(mW) - Indicates the Power in milliwatts that the port is
supplying power to the PD.
Voltage(V) - Indicates the Voltage in volts as measured at the port
when the port is supplying power to the PD.
Current(mA) - Indicates the Current in milliamps that the port is
supplyng to the PD.
2. Once you have configured the parameters, click Apply for the
applicable port(s).
3. From the main menu on the left side of the page, select Save
Configuration to Flash to permanently save your changes.