Allied Telesis AT-GS950/10PS, AT-S110 manual 127

AT-GS950/10PS Switch Web Interface User’s Guide

Note

An error message is generated when you enter a VLAN ID or VLAN Index which is not been defined or when you enter a

VLAN ID or VLAN Index without also clicking on the respective radio button.

4.In the Group MAC Address field, enter a unicast MAC address.

5.Assign the MAC address a Port Member (or members) by selecting the check box beside each port number.

Note

You can assign a maximum limit of 256 static unicast addresses on the switch.

6.Click Add.

The Static Unicast Address Table is updated and displayed with the new MAC Address.

See Figure 39 for an example of a Port-based VLAN.

Figure 39. Static Unicast Address Table with Port-Base VLAN Example

7.From the main menu on the left side of the page, select Save Configuration to Flash to permanently save your changes.

127