Allied Telesis AT-GS950/10PS, AT-S110 manual Modify Out- Profile Action

Modify Out- Profile Action

AT-GS950/10PS Switch Web Interface User’s Guide

7.From the main menu on the left side of the page, select Save Configuration to Flash to permanently save your changes.

To modify a Out-Profile action entry, perform the following procedure:

Note

Before you can modify an entry, you must first enter a Out-Profile action - see “Creating an In-Profile Action” on page 227.

1.From the main menu on the left side of the page, select the Access Control Config folder.

The Access Control Config folder expands.

2.From the Access Control Config folder, select Out-Profile Action. An example of the Create Out-Profile Action page with a Out-Profile Action table entry is shown in Figure 86 on page 232.

3.Select the table entry that you want to modify and click the Modify link in the Action column.

The Modify Out-Profile Action page is displayed. See Figure 87.

Figure 87. Modify Out-Profile Action Page

4. Change the parameters as required.

Note

See “Creating an In-Profile Action” on page 227 for the definitions of each parameters.

5.Click Apply.

The modified Out-Profile action entry is displayed in the table at the bottom of the page of the Create Out-Profile Action page.

6.From the main menu on the left side of the page, select Save Configuration to Flash to permanently save your changes.

233