Allied Telesis AT-S110, AT-GS950/10PS manual Deleting a Classifier

Chapter 18: Access Control Configuration

Deleting a Classifier

2.From the Access Control Config folder, select Classifier.

An example of a classifier table entry on the Create Classifier page is displayed in Figure 77.

3.From the Create Classifier page, identify which classifier that want to modify and click the Modify link in the Action column.

The Modify Classifier page is displayed in Figure 78.

Figure 78. Modify Classifier Page

4. Change the parameters as required.

Note

See “Creating a Classifier” on page 219 for the definitions of each parameters.

5.Click Apply.

The modified classifier entry is displayed in the table at the bottom of the page of the Create Classifier page.

6.From the main menu on the left side of the page, select Save Configuration to Flash to permanently save your changes.

To delete a classifier entry, perform the following procedure:

1.From the main menu on the left side of the page, select the Access Control Config folder.

The Access Control Config folder expands.

222