Allied Telesis AT-S110, AT-GS950/10PS manual Spanning Tree Topology

Chapter 4: STP and RSTP

Spanning Tree Topology

To view the current spanning tree topology, perform the following procedure:

1.From the main menu on the left side of the page, select Bridge. This folder expands.

2.From the Bridge folder, select the Spanning Tree folder.

3.From the Spanning Tree folder, select Topology Info.

The AT-GS950/10PS Designated Topology Information Page is displayed. See Figure 24 for a partial view of this page.

Figure 24. AT-GS950/10PS Designated Topology Information Page

This page is contains status information only and there are no parameters to configure. The following information is displayed about the ports:

Port - Indicates ports 1 through 10 on the AT-GS950/10PS switch.

Trunk - The trunk of which the port is a member.

Link Status - Whether the link on the port is up or down.

Designated Root - The designated root bridge to which the switch’s root port is actively connected.

Designated Cost - The sum of all the root port costs on all bridges, including the switch, between the switch and the root bridge.

Designated Bridge - An adjacent bridge to which the root port of the switch is actively connected.

Designated Port - The root bridge to which the root port of the switch is actively connected.

78