AT-GS950/10PS Switch Web Interface User’s Guide
DHCP Auto Configuration
If you need to automatically update the switch’s configuration files via a remote server, the DHCP Auto Configuration feature is available for this purpose via the DHCP server.
Note
You must enable the DHCP client so that this feature can operate with the DHCP server. See “DHCP Client Configuration” on page 45 for more information.
To configure this feature on the switch, perform the following procedure:
1.From the main menu on the left side of the page, click the System folder.
The System folder expands.
2.From the System folder, select System.
The DHCP Auto Configuration Settings Page is shown in Figure 13.
Figure 13. DHCP Auto Configuration Settings Page
3.From the Auto Configuration State field, select one of the following choices from the pull-down menu:
Enable - The DHCP Auto Configuration feature is active.
Note
You must enable the DHCP client so that this feature can operate with the DHCP server. See “DHCP Client Configuration” on page 45 for more information.
Disable - The DHCP Auto Configuration feature is inactive.
4.Click Apply.
The DHCP Auto Configuration setting that you have selected is now active.
5.From the main menu on the left side of the page, select Save Configuration to Flash to permanently save your changes.
47
