Allied Telesis AT-S110 manual SNMPv3 User and Group Names, Creating SNMPv3 User Group Names

Chapter 17: SNMPv3

SNMPv3 User and Group Names

Creating

SNMPv3 User

and Group

Names

An SNMPv3 User Name and Group Name definition is the basis for all the other SNMPv3 tables. You can create and delete View Names by following the procedures in the following sections:

“Creating SNMPv3 User and Group Names” on page 206

“Modifying SNMPv3 User and Group Names” on page 207

“Deleting SNMPv3 User and Group Names” on page 207

Use this procedure to create SNMPv3 User Names and Group Names:

1.From the main menu on the left side of the page, select the SNMP The SNMP folder expands.

2.From the SNMP folder, select SNMP User/Group.

The SNMP User/Group page is displayed. See Figure 63 on page 193.

Note

There are no default User Names or Group Names defined for SNMPv3.

3.Type a new User Name.

Enter a name up to 31 characters in length.

4.Type a new Group Name.

Enter a name up to 31 characters in length.

5.From the SNMP Version pull down menu, select v3. The encryption check-box becomes active.

6.Check the encryption check-box.

The Auth-Protocol, Priv-Protocol, and associated password fields become active.

7. Select one of the following choices for the Auth-Protocolfield:

MD5: The MD5 authentication protocol. SNMPv3 Users are authenticated with the MD5 authentication protocol after a message is received.

SHA - The SHA authentication protocol. Users are authenticated with the SHA authentication protocol after a message is received.

206