Chapter 19: RMON
252
Events
An event specifies the action of the switch when the ingress packet activity
on a port crosses a statistical threshold defined in an alarm. The choices
are to log a message in the event log of the switch, send an SNMP trap to
an SNMP workstation, or both. Since there are only three possible actions
and since events can be used with more than one alarm, you probably will
not create more than three events - one for each of the three actions.
Perform the following procedure to configure RMON history.
1. From the main menu on the left side of the page, click the RMON
folder.
The RMON folder expands.
2. From the RMON folder, select Event.
The RMON Event Configuration Page is displayed. See Figure 101.
Figure 101. RMON Event Configuration Page
3. The following fields are listed:
Index: This parameter specifies the ID number of the new group.
The range is 1 to 65535.
Description: This parameter specifies a text description of the
event that you are configuring.
Type: This parameter specifies where to log the event when it
occurs. The choices are to log a message in the event log of the
switch, send an SNMP trap to the SNMP NMS software, or both.
Community: This parameter specifies the community where you
want to send the SNMP trap.