Allied Telesis AT-S110, AT-GS950/10PS Port-Based Vlan Configuration, Create a Port- Based Vlan

Chapter 13: Virtual LANs

Port-Based VLAN Configuration

Create a Port- Based VLAN

A port-based VLAN is a group of ports on the switch that form a logical Ethernet segment. This type of VLAN is independent of the header information including VLAN tags in a frame.

You can create and delete Port-Based VLANs by following the procedures in the following sections:

“Create a Port-Based VLAN”

“Modify a Port-Based VLAN” on page 165

“Delete a Port-Based VLAN” on page 165

To create a port-based VLAN, perform the following procedure:

1.From the main menu on the left side of the page, select Bridge. The Bridge folder expands.

2.From the Bridge folder, select VLAN. The VLAN folder expands.

3.From the VLAN folder, select Port-Based VLAN.

The Port-Based VLAN Page is displayed. See Figure 54.

Figure 54. Port-Based VLAN Page

4.To assign a VLAN Index, type a VLAN ID in the VLAN Index field. Choose a value between 1 and 64.

5.To assign a name to a VLAN, type a name in the VLAN Name field. Enter a value of up to 32 characters. For more information about this field, refer to “VLAN Name” on page 151.

164