AT-GS950/10PS Switch Web Interface User’s Guide

System Default Gateway - Displays the default gateway of the switch. To change the default gateway, enter a new gateway. When DHCP is enabled, you cannot change this parameter.

DHCP Mode - For information about setting this parameter, refer to “DHCP Client Configuration” on page 45.

4. Click Apply.

Note

Changing the IP address ends your management session. To resume managing the device, enter the new IP address of the switch in the web browser’s URL field, as shown in Figure 1 on page 20.

5.After you log on to the switch with the new IP address, select Save Configuration to Flash from the main menu on the left side of the page to save the new IP address to memory.

Caution

If you do not select Save Configuration to Flash, the IP address will revert to its original setting when you power cycle or reboot the switch.

31

Page 31
Image 31
Allied Telesis AT-S110 manual AT-GS950/10PS Switch Web Interface User’s Guide