Chapter 15: Quality of Service and Cost of Service
Mapping CoS Priorities to Egress Queues
Before mapping the CoS priorities and the egress queues, you must disable the Jumbo frame parameter on each port. See the Jumbo parameter definition in “Displaying and Configuring Ports” on page 57.
Note
When Jumbo frames are enabled, COS can not be enabled.
To configure CoS mapping, perform the following procedure:
1.From the main menu on the left side of the page, select Bridge. The Bridge folder expands.
2.From the Bridge folder, select QoS. The QoS folder expands.
3.From the QoS folder, select CoS.
The CoS Page is displayed. See Figure 59.
Figure 59. CoS Page
180
