Release Notes - SIP Application | Notes |
3.1.10 From Version 2.0.1 to 2.0.2
3.1.10.1Mandatory Changes
None.
3.1.10.2Optional Changes
None.
3.1.11 From Version 2.0.0 to 2.0.1
3.1.11.1Mandatory Changes
None.
3.1.11.2Optional Changes
•Using template support in master configuration file
The master configuration file may contain the string “[MACADDRESS]”. This will be replaced with the MAC address of the phone. For example, the file 000000000000.cfg may refer to [MACADDRESS]phone.cfg which will be replaced with something like 0004f2100137phone.cfg. This can make provisioning more efficient.
•Adding Nortel MCP NAT traversal
The new parameters voIpProt.SIP.pingInterval and reg.x.proxyRequire should be configured if this feature is needed.
•Adding NAT keepalive
If NAT keepalive is required, the new parameter nat.keepalive.interval should be set to a
3.1.12 From Version 1.6.7 to 2.0.0
3.1.12.1 Mandatory Changes
•Using the phone’s menu to select call progress tones
This feature has been removed from the default configuration of the phone. In order to still use this feature, the old configuration parameters should be added to the sip.cfg file and a new parameter, feature.cpt.enabled, must be added and set to 1. Old configuration parameters are
3.1.12.2 Optional Changes
•Adding IP QoS support for DSCP (DiffServ)
Add the parameters qos.ip.rtp.dscp and qos.ip.callContol.dscp for DSCP. A valid value is either a number or string as follows
1)Any number from 0 to 63
2)EF
3)Any of AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43
Copyright © 2007 Polycom, Inc. | Page 57 |
