POSIFLEX Business Machines XP3300, XP3000 warranty Technical Maneuvers, Storage Device

Please notice that if the XP system is improperly turned off before a complete boot up procedure, the above preset power on control functions will be disabled until next turning off after a complete boot up.

Storage Device

The standard system storage device is 2.5” SATA HDD in the main unit. This device can be replaced with an option SATA SSD HDD.

TECHNICAL MANEUVERS

Some technical maneuver in XP-3000/3300 series such as serial COM port +5V/+12V power supply settings is supported in system jumper setting and printer parameter setting. However, such support is limited to the application of specific Posiflex peripherals and must be disabled when the Posiflex peripherals are disconnected. Failure to follow the discipline would result in electric or fire hazard and such consequences are not covered by product warranty!

The rest applicable technical maneuvers include system CMOS data reset, system reset, DRAM upgrades and installation of optional SATA SSD. All these technical maneuver operations require purchase of applicable Technical Manual from Posiflex or consultation from Posiflex authorized dealers and should be handled only by a qualified technician.

T31454

Page 18